Hwato SDZ-II Electronic Acupuncture Stimulator Machine 6 Output Channel Low Frequency Pulse SDZ II Electroacupuncture Nerve and Muscle Stimulator tens

Hwato SDZ-II Electronic Acupuncture Stimulator Machine 6 Output Channel Low Frequency Pulse SDZ II Electroacupuncture Nerve And Muscle Stimulator

✔ Adjustable frequency: 1-100Hz,Durable alligator clip wires.
✔ Auto-timing Switch,Timer: 0-60 minutes.
✔ Six output channels, multi-acupoint use.
✔ Continuous, intermit, and dense-disperse (modulated) waveforms
✔ Battery for operation/ The power converter operation.

Technical parameters:
Power: Internal power supply DC 9V
Power adapter (InputAC 220V±22V I 50Hz, or AC 110V±11V / 60Hz, Output DC 9V)
Input Power: 10.0VA
Output Pulse Wave: Asymmetric biphasic square wave
Output Channels: 6 Channels
Max. Output Power: 0.3VA (at 250Ω load impedance)
Output Pulse Frequency: 1 to 100Hz Adjustable, ±15% tolerance
Output Modes:
– Continuous wave: Continuous
– Interrupted wave: 15 seconds of continuous wave and 5 seconds of pause
– Dense-disperse wave: The ratio of disperse wave frequency to dense wave frequency is 1:5, disperse wave works 5 seconds and dense wave works 10 seconds. (Time allowance for Interrupted wave and Dense-disperse wave is ± 15%).
Output Current Limit (r.m.s): ≤10mA (at 250Ω load impedance)
Output Direct Component: 0
Output Pulse width: 0.2ms±30% (Basic performance tested by EMC) Measurement: 292 mm x156 mm x47mm

Packing List
1 X SDZ-II Main machine
6 X Output wire.
6 X Needle electrode metal clip.
12 X Skin electrodes.
1 X Power adapter.
1 X English Manual.
1 X Different plug converters are sent according to the country.